Page 110 - Equipment Import Regulations of Viet Nam for K-V Investment Promotion

Y N N/A
2020 K-V Economic Cooperation Work Program
Disseminating Information on Used Machinery and
Foodstuffs machinery/equipment and machinery/equipment for cosmetics
Equipment Import Regulations of Viet Nam for K-V Investment Promotion
or pharmaceutical products
(2) Inspector shall obtain the information as following:
Is there instruction to avoid any risk of infection, sickness or contagion?

Instruction indicates recommended products and methods for cleaning,
˝ Name, Serial No. Brand, Model: Inquiry and affiliated documents from the Enterprise
disinfecting, and rinsing?

˞ Manufacturing year, Name of country of Origin, and Name of Manufacturer: Nameplate,
Operation Manual, Record finding through distribution processing and other recognizable
Portable hand-held and/or hand-guided machinery or equipment
ways.
Have a sufficient number of handles and supports of an appropriate size to
ensure the stability of the machinery or equipment under operation condition?
(3) Confirm the status of the inspected technological line as following

Is the information concerning vibrations transmitted by portable hand-held
˝ Check whether technological line is operated according to a technological process or
machinery mentioned?
diagram to ensure synchronous operation serving manufacturing.

Machinery for working wood and material with similar physical characteristics
˞ Synchronous operations mean that all functions of technologies in a specific line connected
so that all jobs move to the net work station simultaneously
Can the piece being machined or of equipment be placed and guided in safety,
involving the risk of ejection of workpiece?
˟ Inspector can confirm whether the status of the inspected technological line is operating or
Is an automatic brake equipped with, that stops the tool in a sufficiently short time
out of order by checking the operational conditions of the line at the time of inspection.
if there is a risk of contact with the tool?
(4) Confirm the Remaining Capacity or Performance

Check whether the line can produce or achieve at least 85% of products or performance in a
Supplementary essential health and safety requirements to offset hazards due
given time with comparison to its design capacity or performance.
to the mobility of machinery

- Inspector shall check if the production planning of technological line on specific
Is driving position, seating, positions for other persons provided in complete
safety condition?
environmental is established and managed in a given time period.
- Production capacity or performance is based on actual production divided by design
For control systems:
capacity on the basis of an average of three months at least.
- remote control is provided?
(Actual Production/Design Capacity or Performance) *100
- all control devices are able to be actuated from the driving position?
(5) Confirm the amount of raw materials and the rate of energy consumption.

- acoustic /visual warning signal is applied, in case of reversing?
Check that the line consumes its resource not exceeding 15% of its design consumption level.
- starting/moving, travelling function is possible?

- movement of pedestrian-controlled machinery is possible?
˝ In case of Energy Consumption
Protection against mechanical hazards;
- For three-phase voltage use
- moving transmission parts
- roll-over and tip-over
Power consumption (thermal losses) is calculated using min. operating power minus mul-
- falling objects
tiplication of actual measured amperage, voltage and √3 for each equipment. (P_3L = √3
- means of access

- towing devices
100
Protection against other hazards;
- battery

- fire

- emissions of hazardous substances

Information and indications are informed regarding signs, marking and warnings?

Supplementary essential health and safety requirements to offset hazards
due to lifting operations

Protection against mechanical hazards

- risks due to lack of stability

- mechanical strength

- pulleys, drums, wheels, ropes and chains
- lifting accessories and their components

- control of movements

Protection against risks to persons in or on the carrier, due to the lifting of person

- movements of the carrier

- persons falling from the carrier
- objections falling on the carrier

Information and marking: the maximum working load?

- chains, ropes and webbing

- lifting acc essories

Supplementary essential health and safety requirements for machinery
or equipment intended for underground work

risks due to lack of stability

- movement
- control devices

- stopping

- fire

- exhaust emissions